Durbin Metal Industries Limited

Aluminium Alloy - Commercial Alloy

• 1050 '0' Sheet

  Aluminium alloy 1050 / 1050A Sheet in the soft 'O' condition for general purpose use

• 1050A H14 Sheet

  Aluminium alloy 1050 / 1050A H14 Sheet for general purpose use

• 2011 T3 Rod and Bar

  Aluminium alloy 2011 T3 Extruded and Drawn Machining Bar is a high mechanical strength alloy that machines exceptionally well

• 2011 T6 Extruded Rod and Bar

  Aluminium alloy 2011 T6 Machining Bar is a high mechanical strength alloy that machines exceptionally well

• 2014A T651 Sheet and Plate

  Aluminium alloy 2014A T651 is a high mechanical strength alloy

• 2014A T6511 Extrusion

  Aluminium alloy 2014A T6511 is a high mechanical strength alloy

• 4925 - H12 Sheet

  Aluminium alloy 4925 H12

• 5005 - H34 Sheet

• 5052 H32 Triple-Grip Treadplate

  Aalco Triple-Grip Aluminium Tread-plate in alloy 5052 H32

• 5083 - '0' - H111 Sheet and Plate

  Marine Grade Aluminium alloy 5083 0 / H111 - For excellent seawater corrosion resistance

• 5083 - H32 Sheet

  Marine Grade Aluminium alloy 5083 H32 - For excellent seawater corrosion resistance

• 5251 - '0' Sheet and Plate

  Aluminium alloy 5251 0 in the soft condition for good ductility and formability

• 5251 - H22 Sheet and Plate

  Aluminium alloy 5251 H22 for good ductility and therefore good formability.

• 5251 - H24 Sheet and Plate

  Aluminium alloy 5251 H24 for good ductility and therefore good formability

• 5454 - H22 and H32 Sheet

  Aluminium alloy 5454 H22 / H32

• 5454 - 'O' and H111 Sheet

  Aluminium alloy 5454 0 / H111

• 5754 - H111 Treadplate

  Aluminium alloy 5754 Treadplate for excellent corrosion resistance

• 5754 - H114 Sheet

• 5754 - H22 Sheet and Plate

• 5754 - H24 Sheet and Plate

• 5754 - H26 Sheet

• 6061 - T6 Extrusions

  Aluminium alloy 6061 T6 for good corrosion resistance and weldability

• 6063 - '0' Extrusions

  Aluminium Alloy 6063 0 for good surface finish and anodising in the soft condition

• 6063 - T4 Extruded Rod and Bar

  Aluminium Alloy 6063 T4 for good surface finish and anodising

• 6063 - T6 Extrusions

  Aluminium Alloy 6063 T6 Rod/Bar for good surface finish and anodising

• 6063A - T4 Extrusions

  Aluminium Alloy 6063A T4 for good surface finish and anodising

• 6063A - T6 Extrusions

  Aluminium Alloy 6063A T6 for good surface finish and anodising

• 6082 - '0' Sheet

  Aluminium alloy 6082 0 - The highest strength 6000 series alloy in the soft condition

• 6082 - T4 Extrusions

  Aluminium alloy 6082 T4 - The highest strength 6000 series alloy

• 6082 - T6 Extrusions

  Aluminium alloy 6082 T6 - The highest strength 6000 series alloy

• 6082 - T6~T651 Plate

  Aluminium alloy 6082 T6 T651- The highest strength 6000 series alloy

• 6082 - T6~T651 Sheet

  Aluminium alloy 6082 T6 T651- The highest strength 6000 series alloy

• 6101 - T6 Extrusions

  6101 T6 is an extrusion alloy. 6101A and 6101B variants are available: PLEASE REFER TO THE TWO DATASHEETS FOR THESE

• 6101A - T6 Extrusions

  Aluminium Alloy 6101A Extruded Round, Flat, Hexagon & Square Bar and Tube

• 6101B T6 Extrusions

  Aluminium Alloy 6101B Extruded Round, Flat, Hexagon & Square Bar and Tube

• 6262 - T6 Extrusions

  Aluminium alloy 6262 T6 Bar - Very good corrosion resistance and high strength.

• Plancast Plus 5083

  Plancast ® cast aluminium tooling plate has a uniform and fine-grained microstructure. It is produced by SAG (Salzburger Aluminium Group.) Plancast cast aluminium tooling plate is free from residual stresses to the greatest possible extent and are therefore characterised by excellent dimensional stability. It has very high machinability (drilling, milling, etc.) and a very good, close tolerance surface finish/quality.

• Plancast Plus 5754

  Plancast ® cast aluminium tooling plate has a uniform and fine-grained microstructure. It is produced by SAG (Salzburger Aluminium Group.) Plancast cast aluminium tooling plate is free from residual stresses to the greatest possible extent and are therefore characterised by excellent dimensional stability. It has very high machinability (drilling, milling, etc.) and a very good, close tolerance surface finish/quality.

• Transition Joint

  Tri-Plate Aluminium/Steel Marine Grade Transition Joint with Lloyds Approval