Aluminium Alloy - Commercial Alloy - Plancast Plus 5754


Plancast Plus 5754

Spec: Manufacturer's Data


Mechanical PropertyValue
Proof Stress 90-100 MPa
Tensile Strength 200-220 MPa
Elongation A50 mm 12 Min %
Hardness Brinell 55 Min HB

Plancast ® cast aluminium tooling plate has a uniform and fine-grained microstructure.
It is produced by SAG (Salzburger Aluminium Group.)
Plancast cast aluminium tooling plate is free from residual stresses to the greatest possible extent and are therefore characterised by excellent dimensional stability.
It has very high machinability (drilling, milling, etc.) and a very good, close tolerance surface finish/quality.
PLANCAST® PLUS precision cast aluminium tooling plates are manufactured from horizontally continuously cast raw billets.
PLANCAST® PLUS is characterised by excellent, finest-milled surface quality and is available in different formats and materials.
Alloy 5754 is excellent for technical and optical anodising.

Alloy Designations

Plancast Plus Aluminium Tooling Plate is available in alloys 5754 and 5083.  This Datasheet in for alloy 5754 (AlMg3)


Gas Welding: Good

TIG: Very Good

MIG: Very Good

Resistance: Average


Thickness: + or - 0.1mm

Flatness (Up to 15mm): +/- 0.35mm

Flatness (Over 15mm): +/- 0.15mm

Last Datasheet Revision

26 November 2013


This Data is indicative only and as such is not to be relied upon in place of the full specification. In particular, mechanical property requirements vary widely with temper, product and product dimensions. All information is based on our present knowledge and is given in good faith. No liability will be accepted by the Company in respect of any action taken by any third party in reliance thereon.

Please note that the 'Datasheet Update' date shown above is no guarantee of accuracy or whether the datasheet is up to date.

The information provided in this datasheet has been drawn from various recognised sources, including EN Standards, recognised industry references (printed & online) and manufacturers’ data. No guarantee is given that the information is from the latest issue of those sources or about the accuracy of those sources.

Material supplied by the Company may vary significantly from this data, but will conform to all relevant and applicable standards.

As the products detailed may be used for a wide variety of purposes and as the Company has no control over their use; the Company specifically excludes all conditions or warranties expressed or implied by statute or otherwise as to dimensions, properties and/or fitness for any particular purpose, whether expressed or implied.

Advice given by the Company to any third party is given for that party’s assistance only and without liability on the part of the Company. All transactions are subject to the Company’s current Conditions of Sale. The extent of the Company’s liabilities to any customer is clearly set out in those Conditions; a copy of which is available on request.

Get Adobe Reader

Certain files on this page will require the Adobe Reader software. We recommend using the latest version if you don't already have it. Click "Get Adobe Reader" image to download the latest version now.

30 years of trading
Recommend a Customer